Видео

ERNCHA DED YET? GAH! YER DED 'N I KILLED JA.

I'm not here to tell people how to do things, but if you're doing a softmod, Cerbios BFM is recommended since you can get bigger harddrive support and use images such as .iso and .cci. www.xbox-scene.info/forums/topic/420-dl-ogxbox-cerbios-bfm-usb-softmod-installer-1fichier-mega/ If you're looking for a 'chip' solution, same Cerbios, but check out Modxo on the Pico Pi. github.com/shalxmva/modxo Dashboard all comes down to personal preference.

What device are you trying to use. Sounds like your drivers are not set up properly. Check its status in the Device Manager.

​@@androxilogin Im using the standard Pipico, it shows up as a "USB Serial Devive (COM12)" in device manager.​

@@jlockham18 Did you get the .uf2 written to the Pico? If so, it should be as easy as choosing the com port and reading. Make sure you don't have your wires backwards. It shouldn't cause any harm to your board, but it will cause it not to read. Sorry for taking soo long to respond. I read it and forgot about it.

A few shops carry it. Search "XBox/XBox 360 DPad Replacement Kit" on either Etsy or eBay. (Probably cheaper on Etsy)

@@androxilogin just found it, tyvm =D

@@lucasrz111 No problem. Enjoy if you happen to pick on up!

It will often frag if you have the wires in the wrong place. You didn't write to the eeprom, did you? If so, just write the original back.

Thank you for writing back, no I didn't write it. It frags even without the wires connected, can i still write/read the eeprom if it frags? Because it just says it can't find it and check connections. Have I broken something on the mainboard?

@@alexonminecraft-pd5bt You should be able to write to it after it reaches the end of fragging. You should check your eeprom with LiveInfo. If all else fails and your eeprom is corrupt (and your harddrive isn't locked to that eeprom), you can download XEMU and have it generate a new eeprom (it does this on first boot if you don't supply one) and write that one on.

And it really warms my heart when Drew and Stu are getting along. *Stu:* I'm sorry about all of this, Drew! *Drew:* It's alright, little brother. For a nincompoop, you're not half-bad! *Stu:* Remember Funland? *Drew:* Yeah! Remember we used to play miniature golf there when we were kids? *Stu:* How can I forget? The golden days of our youth!

Funnily at odds a lot However, looks like they really need to work out that whole conflict about 'stu getting a real job' and 'drew being on stu's case'!

They love each other but their relationship seems pretty strained!

@shanefraley827 Thank goodness for this quote! Proof that as kids, they did well with each other even if they did fight!

Also in the pilot episode "Tommy's First Birthday" Drew admitted that ripping the ears off of Stu's favorite stuffed toy was wrong and that he was only 4 years old back then and he tearfully begged Stu to forgive him.

Is this your first time messing with a raspberry pi pico? I'm confused; what is 3.3v? The Pico is 5v. As soon as you plug in the pico while holding the button, it should pop up as an empty storage device. You can drag and drop the .uf2 and it will program automatically. Not sure what you mean with the txt file. The Pico .uf2 can be found in the PicoProm Toolset in the description (open it; hit 5 then 5 again and it will copy to the desktop automatically). Good luck! I haven't tried it with a regular Pi since it's overkill for a project such as this.

@@androxilogin UF2 Bootloader v3.0 Model: Raspberry Pi RP2 Board-ID: RPI-RP2 is what popped up when i plugged it in and kept pressing the button and pressing and holding, ima do what you said. and yeah i bought the pi 4 for a pie hole but i won't worth with my isp so its been sitting around. 😆 thank you so much giving it a try again.

@@androxilogin eyyyy progress thank you :) dragged it on there and it refreshed as a com port dealio, ❤ im so happy

@@androxilogin Everytime i try to open the eeprom.bin i got using the tool, using liveinfo it says this is not a valid 1.0 / 1.1 or even 1.6 system the eeprom can't be decrypted, am i doing something wrong? when using the script i got this: "Saving EEPROM file to eeprom.bin Xbox Serial Number: b'UUUUUUUUUUUU' 1 file(s) copied." which looked weird to me. is there a different program i can use to try and open it? i re-read it 2 times and it say's it cant be decrypted.

@@androxilogin was able to read one of the eeproms, one of them was messed up, i screwed it up somehow trying the same thing with an arduino and the display stopped popping up, then the eeprom sayd "UUUUUUU" where i read another one, and got it, went in fatxplorer, set the password, did a new xbox partition dealio, when through all of that and i have and error 16 still on this one, should've just done it on one of my other ones, going to try again tomorrow with a better working system. Can you link or tell me how to put an original xbox OS on the hard drive when setting it up on the computer? do i go to the A drive and put files there? i have apps folder / skins folder / system folder / plash and xboxdash.xbe i think is at least xbmc4gamers but i don't think i put it on the F partition that is 2.72tb. Also when doing a fresh install through fatxplorer, is it not installing an OS onto the hdd so you can boot from...? you have to do that later somehow? just burned a cd but i think the system has to be soft modded first before itll read a burned cd. sorry for your time hope to understand it

Yup. Some methods weren't available during the time this video was made. The scope was more along the lines of getting them onto the PS classic rather than acquiring them.

Yep. Elgato HD60s.

This is a single part of a multi-part stream which explains this is a console being refurbished, cleaned and RGH3 modded.

Why use more flux? It was a successful project.

maybe this will work with my pi4, but ill have to take it out of the case, lame.

@@DaftKermitThePunk It should work with the Pi 4 just fine but more work than one of these little microcontrollers. The eeprom and HDD key are specific to a single console. By the sounds of things, if it isn't clicking and clunking and depending on what you modded your console with, your master password may be TEAMASSEMBLY. With that, you could unlock your old harddrive in FATXplorer and hopefully recover your eeprom. Then put that through LiveInfo to find your HDD key and relock it appropriately after fixing whatever is wrong with your files (if anything). BUT if you're getting error 08 consistently now, try a different IDE ribbon. This could be your whole issue.

@@androxilogini haven't modded this system yet, i cleaned it up and turned it on for the disk error, thats how it was sold to me. Im going to buy a micro adruino and do it that way, kinda stinks but thats what i have to do i think. Just soldered on the 3 wires to the lpc on the board, just waiting for my paycheck to buy the arduino, hoping i set the drivers up correctly for it. thank you ❤

@@DaftKermitThePunk No problem! At least they're cheap!

I like that line when he says 'I finished first in my graduation class....of 7 million'. Another one is when he says 'I've noticed that your country is dangerously underpopulated'.

Thanks for your work with the Nano! It was interesting to see how you used ChatGPT to help out.